RAM'D AIR GEAR DRYER LTD
1-888-3933-379 (1-888-EZEE-DRY)

Fire Fighter Owned Company

Home

About Us

Facility

Specifications

Instructions

Photo Gallery

Dealers

Contact Us

Instructions For:

Immersion/Hazmat Ram Air Gear Dryer

	Use Articulating legs to select the required length Always ensure the plug is inserted into the top position and not inserted into the machine Ensure plugs are in top position Place dressed stickmen into dryer. Turn unit on using desired dry times. Ensure all stickmen are in unit when unit is turned on. Turn stickmen upside down to dry garments in the inverted position.

4 or 6 Place Ram Air Gear Dryer

1. Place boots with the pants rolled down under one of the six hanging ports.

2. Pull the pant suspenders over the shoulder area of the hanging port. (Hoses should be inside pants and hanging down toward boots.) Figure A.
3. Insert one arm of jacket 1/3 of the way into the hanging port while starting opposite side.  Once both hanging arms are approximately 1/3 inserted into jacket, pull jacket until it is hanging with hoses inserted as far as possible. Figure B.
4. Secure coat and pants using Velcro or other closures on your particular garment. Please note that pants and jackets should be placed on the same port.
5. Turn on the red valve directly connected to the ports. Figure C.
6. Use the helmet and glove rack to dry other accessory equipment that needs drying. Figure D. Ensure red port valve is in the open position.   (Glove ports do not need to be fully open and can be operated partially opened.) Figure E.
7. Close all unused ports.
8. Select appropriate timer setting.
9. Hearing protection may be required when working in same vicinity while unit is in operation.
10. Your gear will be dry in approximately 5-8 hours.

Not only can the RAM-AIR GEAR DRYER be used to dry your gear, but as an added option, you can remove the dryer to hook it to your pump's water ports for quick winter drying to help prevent damaging winter freeze ups.